I built one of these and used 1 inch foam board and used a circular saw to cut it in 2 inch sections but don’t cut all the way through it. Adjust so you cut 3/4 of the way through and you’ll end up with an accordion like piece of insulation that you can wrap around the tub. Use rope with rubber bands to hold it in place around the tub. Hope that make sense…
A great post. Thanks
🙏🏻🙏🏻
What will you use for insulation around the tub (if you go the stock tank route again)?
I’ll probably use rigid foam, or maybe spray foam and shave it down.
I built one of these and used 1 inch foam board and used a circular saw to cut it in 2 inch sections but don’t cut all the way through it. Adjust so you cut 3/4 of the way through and you’ll end up with an accordion like piece of insulation that you can wrap around the tub. Use rope with rubber bands to hold it in place around the tub. Hope that make sense…
Goals...
Your book inspired me to build one. I like it but find myself using the smaller stock tank and single stove more often than the bigger tub.
Love to hear it. I might set it up to do both.